THE USUAL DIAMOND-STONE PITCH
Fast cutting.
Impressive stock removal is an easy selling point. But speed alone says little about the scratches you still have to remove.
LUZI / SPECIFICATIONS
A full 20 mm.
Of abrasive.
A broad working footprint. A substantial abrasive body. Luzi combines a 210 × 75 mm working footprint with 20 mm of diamond-resin abrasive, for wide-bevel foundation polishing before natural stones.
- Length
- 210 mm
- Width
- 75 mm
- Abrasive thickness
- 20 mm
The 20 mm specification describes the abrasive material itself, not a holder or base.
A little extra from Luzi. Luzi usually includes a few extra millimeters of abrasive thickness beyond the specified 20 mm, at no extra charge.
THE MATERIAL / THE METHOD
The essentials.
Nothing overlooked.
Developed in collaboration with sword polishers. The harder version brings that foundation-polishing approach to a wider community.
- Abrasive
- Diamond, with roughly 30% diamond content in the stone.
- Binder & formula
- A harder version, made with a new formula and a new resin binder. This is Luzi's proprietary formula.
- Cutting
- Very fast cutting for wide-bevel foundation work.
- Scratch pattern
- Very shallow scratches, easier to refine away with natural stones.
- Intended work
- Wide-bevel foundation polishing, laying the groundwork for natural-stone stages.
- Surface preparation
- Each stone is personally hand-flattened on a micron-level-flat granite surface, then hand-polished.
- Edges
- All edges chamfered by hand.
- Recommended progression
- 240 → 400 → 1000 → 3000 → natural stones
- Shipping
- Free shipping on all US shipments.
Stone-specific wetting and care instructions will be published before launch. Do not assume a soaking or splash-and-go method.
THE POLISHING DIFFERENCE
Fast cutting.
Very shallow scratches.
Speed is only half the story. Luzi's proprietary formula gives very fast cutting and very shallow scratches, for wide-bevel polishing before natural stones.
LUZI / FOR POLISHERS
Fast cutting.
Shallow scratches.
Luzi's proprietary formula delivers very fast cutting and very shallow scratches. Its resin-bonded diamond abrasive is built for actual wide-bevel polishing, not just stock removal.
Those shallow marks are easier to refine away in the natural-stone stages that follow. The foundation should help the finish, not fight it.
Cutting speed, scratch depth, and refinement vary with grit, steel, pressure, and technique.
YOUR WIDE-BEVEL FOUNDATION
Take a closer look.
Explore the individual grit pages, with room for product galleries, polishing demos, and the details behind each result.